How many bolts hold down the front bumper cover, and how hard is it to remove, also how hard is it to swap over the front bumper itself, Is it bolted on or part of frame? (was in small accident that bent some metal and broke some plastic would like to replace.

[This message has been edited by Phirewire (edited 05-16-2013).]

The metal under bumper is held on with 4 bolts.
the skin is held on with screws behind the side maker lights. a row across the top under the front edge of the hood. The inner fender screws to the bumper and several along the bottom attaching to a metal plate. There is also a metal strap on each side near the horn(s). think that is most of them. You can figure it out from there.

[This message has been edited by Dodgerunner (edited 05-16-2013).]