Can someone pls list me the electrical ground (main ones) i need on my engine end...(i just rebuilt my first fiero and i dont wanna blow anything when i reconnect the battery and turn the key)

So i know there's supposed to be a ground from the block to the chassis? battery to the starter? that kinda thing...and if someone wants to list ALL the grounds needed, or point me in the right direction, i would be forever greatful!

There is one on the front right of the engine block that grounds everything attached to the engine (starter etc). and the ecm and fuel pump grounds on one of the studs connecting the engine to the transmission. Those are the only ones that I have removed when doing an engine swap. Having those two on will allow the car to start and run.

You can not have 2 many grounds on a fiero.

thanks so much guys!

Many are here...
See my Cave, Wire Service

------------------
Dr. Ian Malcolm: Yeah, but your scientists were so preoccupied with whether or not they could, they didn't stop to think if they should.
(Jurassic Park)

The Ogre's Fiero Cave (It's also at the top and bottom of every forum page...)

quote Originally posted by FFIEROFRED: You can not have 2 many grounds on a fiero.

Agreed! and make sure they all have good clean connections. I also put a dab of grease in and on the connection as well to try to prevent corrosion. Bad grounds can cause all sorts of strange things to happen.