Where can one find 11 and 9" wide wheels with the Fiero bolt pattern? Is this a custom job and if so any names of custom shops? Thanks!

Here are some shops that will make them for you for between $475 and $535 per wheel:
www.bozeforged.com
www.budnik.com
www.centerlinewheels.com
www.billetspecialties.com

You can also get the Miro wheels for the VW in a 5x100 pattern in 17x10 and 17x8.5 if you want to go a little smaller and they are $999 for all 4. You may need spacers depending on the body mods or they may fit perfectly as-is. Just see the offset.
http://www.ecstuning.com/Vo...ro_Wheels/ES2167453/

That's pretty wide. What's your reasoning for running tires this wide? Lots of hp, handling?

Check the 'Mall' sections on VW forums.

quote Originally posted by montage: Where can one find 11 and 9" wide wheels with the Fiero bolt pattern? Is this a custom job and if so any names of custom shops? Thanks!

Not sure if they have any left, I purchased the EVO II with the stainless lip and gloss black center in 18x8 and 18x9.
Here's a link to some of them: http://www.wheelsnext.com/w...g-Black%20Gloss.html

http://www.wheelsnext.com/w...202-Hypersilver.html

[This message has been edited by Joseph Upson (edited 11-26-2011).]

quote Originally posted by Joseph Upson: Not sure if they have any left, I purchased the EVO II with the stainless lip and gloss black center in 18x8 and 18x9. Here's a link to some of them: http://www.wheelsnext.com/w...g-Black%20Gloss.html http://www.wheelsnext.com/w...202-Hypersilver.html

What offsets are you running in those?

[This message has been edited by Bridgetown (edited 11-26-2011).]