Where can I find the gaskets between the upper and lower plenum intake?

Mike

L44 V6 Fiero upper plenum gaskets;

http://www.fierostore.com/P...px?s=52731&d=197&p=1

I'm not sure if you can get them from a common parts store supplier by themselves. Last time I checked you had to buy a full gasket set. Somebody might chime in and confirm otherwise.

[This message has been edited by Fiero84Freak (edited 08-29-2011).]

http://www.perfectengine.co...p/victor-ms14752.htm

------------------
Mark
In the Great Northwest!

I would rather not wait for shipping...any other options?

Mike

A roll of gasket material, a sharpie and an xacto knife

------------------
Mark
In the Great Northwest!

Any parts store has the gasket set. I've never found them individually. About $18 plus tax

Part No. MS 93020 at Advance Auto

FelPro part number MS 93020

Edit: Typed out the post, got a phone call and forgot to submit. Sorry for repeating what everyone else had already done.

[This message has been edited by fierofool (edited 08-29-2011).]

No worries, thanks for the responses, I will most likely just buy the entire gasket set

Mike

with a razor blade & a set of "Hole punches", it takes all of 2 minutes to make a set. I usually make 2-3 sets at a time. Who wants to pay for an entire gasket set when you can make them for less than $5 !