Hooking up my gauges and lights and just need to know where the temp sensor is to confirm my connections. thanks

Under the T-stat. You will need a 3 wire sensor so your gauge gets a signal.

------------------
Turbo 3800 E85 5spd spec5
11.53@126.7

[This message has been edited by Justinbart (edited 06-21-2011).]

The yellow and black wires of the three wire CTS run to the PCM. The green wire (center pin) of the CTS connects to the gauge wire at C500



http://www.greatautohelp.co...r-location/3800.html

[This message has been edited by phonedawgz (edited 06-21-2011).]

got it, thank u!