Pennock's Fiero Forum
  Technical Discussion & Questions - Archive
  Many Thanks Wambat! CS130 Alternator Install

T H I S   I S   A N   A R C H I V E D   T O P I C
  

Email This Page to Someone! | Printable Version


Many Thanks Wambat! CS130 Alternator Install by Kevin87FieroGT
Started on: 03-30-2011 10:09 PM
Replies: 0
Last post by: Kevin87FieroGT on 03-30-2011 10:09 PM
Kevin87FieroGT
Member
Posts: 1202
From: Michigan
Registered: Nov 2010


Feedback score: (2)
Leave feedback

Rate this member

Report this Post03-30-2011 10:09 PM Click Here to See the Profile for Kevin87FieroGTSend a Private Message to Kevin87FieroGTDirect Link to This Post
Just wanted to say THANKS to Rabid-Wombat for his great write up of the conversion of the stock 2.8L alternator to the CS130 105amp version. It was very helpful having the part numbers of the alternator and the module (connector). I found the alternator at a number of stores, but found the module at O'Rielly's. Many of the stores I visited in the area carried Dorman parts, but O'Rielly's had the module on the shelf ($7). Wombats suggestions for removal of the old alternator were right on!

Check out his site: http://home.coastalnow.net/~brent1/csalt.htm

Lots of power now.

Thanks Wombat!!
IP: Logged
PFF
System Bot



All times are ET (US)

T H I S   I S   A N   A R C H I V E D   T O P I C
  

Contact Us | Back To Main Page

Advertizing on PFF | Fiero Parts Vendors
PFF Merchandise | Fiero Gallery
Real-Time Chat | Fiero Related Auctions on eBay



Copyright (c) 1999, C. Pennock