Pennock's Fiero Forum
  Technical Discussion & Questions - Archive
  Sun visor screw length?

T H I S   I S   A N   A R C H I V E D   T O P I C
  
Email This Page to Someone! | Printable Version
Sun visor screw length? by psychosurfer
Started on: 01-24-2011 07:03 PM
Replies: 3
Last post by: 2.5 on 01-28-2011 01:11 PM
psychosurfer
Member
Posts: 2014
From: Jefferson, GA USA
Registered: Mar 2006

Feedback score:    (6)
Leave feedback

Rate this member
Report this Post01-24-2011 07:03 PM Click Here to See the Profile for psychosurferSend a Private Message to psychosurferDirect Link to This Post
Okay, I am not near my shop, car, or house... Anyone know how long the screws are that hold the sun visor in a Fiero? Whoever answers correctly first, wins a free high-five from themselves!
IP: Logged
PFF
System Bot
psychosurfer
Member
Posts: 2014
From: Jefferson, GA USA
Registered: Mar 2006

Feedback score:    (6)
Leave feedback

Rate this member
Report this Post01-27-2011 09:23 PM Click Here to See the Profile for psychosurferSend a Private Message to psychosurferDirect Link to This Post
Anyone at all...? How about an approximate of how long they need to be?
IP: Logged
deceler8
Member
Posts: 2139
From: Sioux City, Iowa USA
Registered: Sep 1999

Feedback score: (1)
Leave feedback

Rate this member
Report this Post01-27-2011 09:43 PM Click Here to See the Profile for deceler8Send a Private Message to deceler8Direct Link to This Post
It's awful damn cold out in the (detached) garage or else I'd look...

As I recall, they can't be more than 3/4 inch in length, an inch at best...

Actually, I replaced the visors in my '86 2m4 with visors from a 1990 or so Lumina and the screws looked exactly the same. The passenger side needed some tweaking, the driver side was an exact fit.

Does that do it ????

------------------

IP: Logged
2.5
Member
Posts: 43235
From: Southern MN
Registered: May 2007

Feedback score: (1)
Leave feedback





Total ratings: 184
Rate this member
Report this Post01-28-2011 01:11 PM Click Here to See the Profile for 2.5Send a Private Message to 2.5Direct Link to This Post
1 inch is not too long, I know this, I used 1 inch.
Maybe they are 7/8
IP: Logged



All times are ET (US)

T H I S   I S   A N   A R C H I V E D   T O P I C
  

Contact Us | Back To Main Page

Advertizing on PFF | Fiero Parts Vendors
PFF Merchandise | Fiero Gallery
Real-Time Chat | Fiero Related Auctions on eBay



 Copyright (c) 1999, C. Pennock