Pennock's Fiero Forum
  Technical Discussion & Questions - Archive
  fiero flywheel

T H I S   I S   A N   A R C H I V E D   T O P I C
  
Email This Page to Someone! | Printable Version
fiero flywheel by barry 1982
Started on: 01-21-2011 12:31 PM
Replies: 4
Last post by: Old Lar on 01-21-2011 04:06 PM
barry 1982
Member
Posts: 13
From:
Registered: Jan 2011

Feedback score: N/A
Leave feedback

Rate this member
Report this Post01-21-2011 12:31 PM Click Here to See the Profile for barry 1982Send a Private Message to barry 1982Direct Link to This Post
Is there a shim to put in behind the flywheel after you machine it down. A guy said he thought there might be. I had a clutch blow up and I don't want to tear that thing apart again. So I wanted to be sure there wasn't one. It is for the 2.8 w/ a 4 speed.
IP: Logged
PFF
System Bot
TONY_C
Member
Posts: 2747
From: North Bellmore, NY 11710
Registered: May 2001

Feedback score: (2)
Leave feedback

Rate this member
Report this Post01-21-2011 01:23 PM Click Here to See the Profile for TONY_CSend a Private Message to TONY_CDirect Link to This Post
NO
IP: Logged
fresnofiero559
Member
Posts: 13
From: Fresno, Ca
Registered: Jan 2011

Feedback score: N/A
Leave feedback

Rate this member
Report this Post01-21-2011 01:28 PM Click Here to See the Profile for fresnofiero559Send a Private Message to fresnofiero559Direct Link to This Post
 
quote
Originally posted by barry 1982:

Is there a shim to put in behind the flywheel after you machine it down. A guy said he thought there might be. I had a clutch blow up and I don't want to tear that thing apart again. So I wanted to be sure there wasn't one. It is for the 2.8 w/ a 4 speed.


i believe thats only for the auto only other wise manual has none!
IP: Logged
TONY_C
Member
Posts: 2747
From: North Bellmore, NY 11710
Registered: May 2001

Feedback score: (2)
Leave feedback

Rate this member
Report this Post01-21-2011 01:48 PM Click Here to See the Profile for TONY_CSend a Private Message to TONY_CDirect Link to This Post
 
quote
Originally posted by fresnofiero559:


i believe thats only for the auto only other wise manual has none!


There is no flywheel on an auto; it's a flex plate and it doesn't get machined.

[This message has been edited by TONY_C (edited 01-21-2011).]

IP: Logged
Old Lar
Member
Posts: 13798
From: Palm Bay, Florida
Registered: Nov 1999

Feedback score: N/A
Leave feedback





Total ratings: 214
Rate this member
Report this Post01-21-2011 04:06 PM Click Here to See the Profile for Old LarSend a Private Message to Old LarDirect Link to This Post
When I had the flywheel machined, the machinist made a shim for the flywheel, which was put on with the flywheel.
IP: Logged



All times are ET (US)

T H I S   I S   A N   A R C H I V E D   T O P I C
  

Contact Us | Back To Main Page

Advertizing on PFF | Fiero Parts Vendors
PFF Merchandise | Fiero Gallery
Real-Time Chat | Fiero Related Auctions on eBay



 Copyright (c) 1999, C. Pennock