Torque specs - 88 wheel bearing/hub to spindle

Click here to visit The FieroStore | View all sponsors

Pennock's Fiero Forum

Technical Discussion & Questions - Archive

T H I S I S A N A R C H I V E D T O P I C

Email This Page to Someone! | Printable Version

Torque specs - 88 wheel bearing/hub to spindle by michfiero

Started on	: 12-04-2010 08:42 PM
Replies	: 2
Last post by	: michfiero on 12-04-2010 09:11 PM

michfiero
Member

Posts: 422
From:
Registered: Sep 2008

Feedback score: (2)
Leave feedback

Rate this member

Report this Post12-04-2010 08:42 PM

Hi ALL

Anyone out there know the torque numbers for the 3 bolts that hold the front wheel bearing/hub to the spindle? Been looking through the forum but haven't found anything.

Thanks

IP: Logged

PFF

System Bot

Marvin McInnis
Member

Posts: 11599
From: ~ Kansas City, USA
Registered: Apr 2002

Feedback score: N/A
Leave feedback

Total ratings: 227
Rate this member

Report this Post12-04-2010 08:57 PM

Click Here to visit Marvin McInnis's HomePage

Send a Private Message to Marvin McInnis

https://www.fiero.nl/forum/F.../HTML/113015.html#p2:

"The correct front-hub-to-knuckle torque is probably 62 ft-lb (dry) ... which is the value specified in the FSM for the identical-spec rear hub attach bolts (Ref p. 3D-3)."

IP: Logged

michfiero
Member

Posts: 422
From:
Registered: Sep 2008

Feedback score: (2)
Leave feedback

Rate this member

Report this Post12-04-2010 09:11 PM

Thanks Marvin!

IP: Logged

All times are ET (US)


T H I S I S A N A R C H I V E D T O P I C

Advertizing on PFF | Fiero Parts Vendors
PFF Merchandise | Fiero Gallery
Real-Time Chat | Fiero Related Auctions on eBay

Copyright (c) 1999, C. Pennock