Back in 2004, Jazzman posted a pic which had the torque specs for all the water pump bolts. (1988 V6)

The pic was in this post: https://www.fiero.nl/forum/A...050119-2-055283.html

and has vanished, of course. The specs I find in the '88 FSM say 7 lb-ft for all the bottom five bolts and I find nothing on the rest.

Does anybody have the torque specs for all the water pump bolts?

TIA,
Larry

This came with a water pump I installed on my Fiero:



Mike

Mike,

+ to ya!

Thank you muchly!

Pity it does not also specify the torx size, too! Well, I guess I will print that out and keep track and post an updated drawing!

Thanks again
Larry

No problem! They might have considered including the bolt sizes but the later Fiero water pump bolts are torx, earlier years are hex head bolts. Anyway, get that new pump on and go for a cruise. No plastic impeller on your new pump I hope....?

Mike

Nope, Napa pump #1 was plastic, Napa pump #2 was stamped sheetmetal (never saw one like that before), but first try at Autozone was just was I was looking for.

Thanks again,
Larry