Hey fellow Fiero owners,
I've had a minor issue with my Fiero that I know most others have which is the interior trim making a rattle as you drive along from vibration which makes a constantly annoying noise. Mine even tended to rattle with the bass from my speakers which didn't sound too good.
I have been trying to think of something I could wedge between the A pillar trim and the side of the dash to stop the rotten rattle and worked it out today.
I bought the cheapest smallest rubber hose I could find at the local auto parts store which was a little heater hose which I cut into smaller bits and wedged them in on both sides of the dash. I have seen people use foam (i.e anti-static foam) to try and stop the rattles in their car and it didn't look good or seem to be effective. However this seemed to do the trick and it's completely out of sight.
I thought I'd post it here just in case other Fiero owners aren't interested in pulling apart their trim pieces to find the problem. This was quick and effective. Hope that helps!
------------------
James
RHD
1987 Pontiac Fiero GT[This message has been edited by James_GT (edited 06-04-2010).]
