Can the regal gs pcm be used for the 3800sc swap ,can it be programmed ?
thanks

Yes.

I wouldnt use it if it was a 97.

its a 98
thanks for the response !

I should have all the wiring diagrams that you need for a 99 Regal GS (are they the same, DH?) here.... http://www.cowspatoot.com/wiring/

Yes a 98 regal GS will work, I am running it now. You will have to wire it differently than the typical Grand Prix wiring you see on here. You will also need to bypass the passkey. It would prolly be easier to flash it to a GP file and wire it that way.

------------------
'84 3800SC, XP cam, 3.2 pully, HPTuners, N* TB, 4sp, SPEC 3+ clutch, Aluminium flywheel, pacesetter headers, F355 body kit, weight reduction

quote Originally posted by Dracor: Yes a 98 regal GS will work, I am running it now. You will have to wire it differently than the typical Grand Prix wiring you see on here. You will also need to bypass the passkey. It would prolly be easier to flash it to a GP file and wire it that way.

This is correct.

98 wiring is slightly different than 99+, but I think in terms of fieros it is the same.