I just bought an AC Delco fuel pump, and it came with a 2" hose to connect from the pump to the supply line. After reading this thread,

https://www.fiero.nl/forum/Forum2/HTML/101054.html

I want to make sure the hose I use meets SAE 30R10 (submersible fuelhose) specifications. There aren't any identifying marks on the hose, other than a purple stripe running the lengthof the hose. Is this a submersible fuel hose?

Fuel pump is an AC Delco EP386

Oh yeah: NAPA wants $28.49 for a 1 ft section of this hose.

------------------

1984 Fiero SE

quote Originally posted by RWDPLZ: I just bought an AC Delco fuel pump, and it came with a 2" hose to connect from the pump to the supply line. After reading this thread, https://www.fiero.nl/forum/Forum2/HTML/101054.html I want to make sure the hose I use meets SAE 30R10 (submersible fuelhose) specifications. There aren't any identifying marks on the hose, other than a purple stripe running the lengthof the hose. Is this a submersible fuel hose? Fuel pump is an AC Delco EP386 Oh yeah: NAPA wants $28.49 for a 1 ft section of this hose.

The hose that comes with the pump is good to use. I usually don't use it being it doesn't fit the hard line side of the sending unit. I replace it with FI line and have had no issues out of it.