Hi!

My pall has been mount a 2.8 L V6 over in his Fiero, that normally run with a 2.5 L 4cyl.
Now he has trouble, it will not start.
So now we are looking for a diagram of wiring harness on a Fiero from 86`

Where can I find it online, or is there one of you that has a diagram, which he will be so nice to send it to me on mail?

I really hope that you can help me find a diagram.

Thanks.
Peter.

For an 87, but the same

Yes he have the harness that followed whit the enegien and the Ecm also for the 2,8L v6.

what fuse and wher does it has to be mount?


Peter.

The fuse panel under the left side of the dash. 2.5 only used "TBI INJ1" 2.8 need "TBI INJ2" added.

Mike..!! you are a life saver!!!

I will have houg you if i coud!!!


Thanks!!
Peter.
Sorry my english. ;o)

Dont have one handy, but I can see if I can dig one up somewhere.

Hi!

I still need a diagram over the wiring harness for the 2,5L 4.cyl

Are there any of you,that have such they will send to me?

Thanks.
Peter.

http://www.fieronews.net/fusion/downloads.php

Hope you can find what you need on that page.
If you pm me your e-mail address I can send you some PDF files of the wire harnesses.

Nice looking car

Hope this helps:

http://web.archive.org/web/...s/fo_elmo/wiring.htm

I have a full 86 and 88 service manual but I would need to FTP it to you because of the size.

[This message has been edited by mike-ohio (edited 09-12-2009).]

I have an 86 service manual here: http://www.cowspatoot.com/d...o_Service_Manual.pdf
I also have a stack of wiring schematics here: http://www.cowspatoot.com/wiring
I don't remember where I got these PDFs....so I apologize if I have stolen someone's work.

If anyone has a copy of one that isn't there, I am interested in it.

[This message has been edited by CowsPatoot (edited 09-13-2009).]

Thank you all for your help.
I have what I need now,i hope! ;o)

Thanks!
Peter.