time to change oil again...is there a larger capacity filter to put in
place of the stock one,86 gt 2.8....i just want a little extra....thanks keith

Dont think there is one to go in the stock location, but you can get a relocation kit and use a 2qt. truck filter.

A FRAM PH3980 works fine on a stock 86, 2.8, I have been using it for years. It is longer than the FRAM PH3387A which is the stock one listed at http://www.fram.com. It's funny, the PH3980 is the stock one listed for the Duke as well.

[This message has been edited by Sidecar 2M6 SE (edited 05-03-2009).]

hey thanks for quick replies, guys,that FRAM # is the 1 i was wanting, i do believe...
seen it on here some time ago but forgot the part number....

thanks again,keith

[This message has been edited by interceptor429 (edited 05-03-2009).]

AC Delco PF 47 is the stock filter and PF 52 is a larger filter.

quote Originally posted by Old Lar: AC Delco PF 47 is the stock filter and PF 52 is a larger filter.

^^^ +1eleventybillion

PF 52 and five quarts of a good oil and I'm good to go 'till next oil change.

quote Originally posted by Old Lar: AC Delco PF 47 is the stock filter and PF 52 is a larger filter.

PF47 is what my aveo uses and PF52 is what i use on my 3500 swap.

------------------
First LX9 Fiero GT, 1987 | My Fiero Fuel Economy | MPG Display for OBD I
Youtube Videos of My GT | 87 GT Inside Test Run | 3500 Fiero GT Test Run 01
3500 Fiero GT Test Run 02 | 3500 Fiero GT Test Run 03 | 3500 Fiero GT Test Run 04
If you can't fix it with a hammer, you've got an electrical problem
Fiero's are people too. We pay just as much attention to them, if not more than our loved ones
screw paying those bastards. im not going to become rich by paying for things.....

thank you all.....