i know i could e-mail rodney but didnt know if some 1 had directions and pics.
I,ve stripped the cradle of the old bushings, now on the back ones there was a metal
plate if you will that the bushing pushed through. Those came out with the bushing,
is that correct? I thank you all in advance, Ray

Sorry, I got my aluminum bushings from another source, and my install is on another forum

quote Originally posted by Isolde: Sorry, I got my aluminum bushings from another source, and my install is on another forum

Well, that was helpful.

You never know, the OP might ask to see my pics anyway.

quote Originally posted by Patrick: Well, that was helpful.

Well that was not necassary either. lol
ISOLDE i love seeing pictures so show them off.
Rodney is e-mailing me his directions

This is how we do it. After removing the old bushing, get a small length of pipe like 4" long that is larger than the diameter of the cradle bushings. Now get two 1/4 " steel plates about 3" x 3". Insert the bushing in the cradle hole as far as it will go by hand. Now put the small piece of pipe in back of the the cradle hole where the bushing will exit, and place the steel plates at each end (on on the pipe and the other on the front surface of the bushing. Get a large C Clamp and tighten it to push the bushings into the cradle until they are seated. This tehnique should work when seating any bushing into a control arm or cradle.

------------------
" THE BLACK PARALYZER" -87GT 3800SC Series III engine, 3.4" Pulley, N* TB, LS1 MAF, Flotech Exhaust Autolite 104's Custom CAI 4T65eHD w. custom axles, HP Tuners VCM Suite.
"THE WILDCAT"
87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H
" ON THE LOOSE WITHOUT THE JUICE "

quote Originally posted by Isolde: You never know, the OP might ask to see my pics anyway.

Well sure, but it just seems strange you couldn't have initially supplied a link.

Is there something secret I'm unaware of?

Patrick, your first post in here had me laughing for 5 minutes. Thanks. Partly because your post was even less helpful than mine. The secret is I don't want to get banned for linking to the enemy. I'll try to PM the link to you and the OP.

quote Originally posted by Isolde: The secret is I don't want to get banned for linking to the enemy. I'll try to PM the link to you and the OP.

Oh, I doubt that you'd get banned for linking to a helpful thread, but I appreciate the PM. I've got aluminum cradle bushings here to install as well, so your instructions may prove to be helpful. Thanks.