Put in new fuel injectors and replaced the fuel pressure regulator diapraghm. The car runs fine now but there is gas seeping out from around the fuel pressure regulator cover. I am confused as to why it's leaking. I did tighten the "security' torx screws to a little more than the specified torque because it seemed too low. I dont want to be driving it while it's leaking.
I re-read the service manual and it mentioned a "connection seal" but I dont recall any seal or gasket when I took the fuel pressure regulator apart. I put in a GP-Sorenson diapraghm by the way.
Might have sandwiched the gasket to tight and tore it a little causing the leak. There is only one way to find out and that it taking it back apart and look.
