Mine has failed and the part is discontinued through GM as well as aftermarket suppliers that I have looked into.

Are there any other GM cars (88 - 94 V6 282 J cars?? .... 91-93 LQ1 284 W cars??) that I could use a reverse light switch out of?


Or.....is there a supplier for these switches that I can't find (Fiero store doesn't carry them).

Please let me know where you get yours.

Thanks

try contacting http://www.blumenthalmfg.com/ they have some getrags that have never been installed, but dont have our bolt pattern. how that happened, i dont know. the parts internally are the same. maybe you can see if they have any reverse light switches or can snag one from the inside of one of those.

------------------
1987 Fiero GT built by my brother, merlot566jka, 3500 LX9 from 06 Malibu, WOT-TECH.com 1280 grind stage 3 cam, LS6 valve springs, 1227730 ECM conversion, Darrel Morse solid aluminum cradle mounts, Truleo headers modified to fit the 3500, 36# inectors, 70mm 4.3 throttle body adapted to 3500 intake, ported heads, upper and lower intakes, lightly polished, tcemotorsports.com crank trigger wheel, CenterForce dual friction clutch, Flowtech Afterburner muffler, 2.5" piping, cat deleted, EGR deleted, SinisterPerformance tuning, C6 Corvette exhaust tips. projected to be 35 MPG with a guesstimate of 250 hp at the motor

search is your friend.
this thread has all the info you should need:
https://www.fiero.nl/forum/Forum2/HTML/093452.html