i was wondering wha the lug pattern for a fiero was and if it was compatable with any other cars. more in specific a dodge neaon srt-4. my friend still has his stock ones upstate and was gonna ship them down if they fit. if anybody knows that would be a big help. thanks
IP: Logged
12:55 AM
PFF
System Bot
mtownfiero Member
Posts: 1779 From: Mansfield, Mass Registered: Mar 2007
I tried one of the 16" cast wheels from my 07 Vibe on my 84 Fiero yesterday. The bolt pattern was good, but the wheel wouldn't seat. Seemed like the center of the rim was too small for the "centering ring".
IP: Logged
08:26 AM
Mickey_Moose Member
Posts: 7568 From: Edmonton, AB, Canada Registered: May 2001
I tried one of the 16" cast wheels from my 07 Vibe on my 84 Fiero yesterday. The bolt pattern was good, but the wheel wouldn't seat. Seemed like the center of the rim was too small for the "centering ring".
This is the same for some of the other wheels in the above list - people usually get around it by modifing the wheel or hub to make it fit (usually the wheel).
IP: Logged
08:49 AM
Xerces_Blackthorne Member
Posts: 6163 From: Mertztown PA Registered: Mar 2008
If buying hub-centric (recommended), the ring needs to be 57.1mm. If buying lug-centric, as long as the ring/hole is larger than 57.1, no problems. I always search for PT Cruiser rims because they are hub-centric at 57.1mm. Lotsa threads on here about rim widths and tire size fitment issues. There are many variables to consider.
