would any stright 6 engines fit in the fiero?
i have a 1989 jeep cheerikee with a 4 liter straight 6 engine. i think it be kinda cool to put in the fiero. but they are abit long so i dont know.
has anyone put a line 6 in a fiero?

Of course it will fit in a Fiero. Oh wait...you probably intend to put a transmission in with it. Never mind.

I hear 2JZ's fit just fine.

what is the 2JZ's from?

Strange Combo. Any reason for a inline 6

Rumor has it that a VR6 will fit in a Fiero
Dave

------------------

1987 GT (my toy-see above), 1987 GT (wife's toy), 1986 SE soon to be VR6, certified master technician/shop owner
www.njautobahn.com

quote Originally posted by joshh44: what is the 2JZ's from?

Toyota Supra

quote Originally posted by joshh44: would any stright 6 engines fit in the fiero? i have a 1989 jeep cheerikee with a 4 liter straight 6 engine. i think it be kinda cool to put in the fiero. but they are abit long so i dont know. has anyone put a line 6 in a fiero?

The Fiero's 4-cylinder is almost too long. A straight 6 - no way. You can check with a tape measure.

------------------

3.4L S/C 87 GT www.fierosound.com
2002/2003/2004 World of Wheels Winner &
Multiple IASCA Stereo Award Winner

Yea, I have a straight 6 in my garage (yea, I know, what don't I have) It would fit great in a Fiero if you did not need a trans or a decklid.

Who would put a Skyline engine in a Fiero? I have heard that a GM LSx engine is lighter, sounds better too.

quote Originally posted by bmwguru: Rumor has it that a VR6 will fit in a Fiero Dave

Good one.

quote Originally posted by bmwguru: Rumor has it that a VR6 will fit in a Fiero Dave

I suppose you can back that statement up?

Ron

In line six in the Fiero? Yup, it can be done, put it in sideways!

Cordially,
Kevin

Found the answer Volvo makes a FWD inline 6 Pic http://us.autos1.yimg.com/i...r_engine_640x480.jpg
its found in newer XC90's and V70's and maybe others. Its rated at 235hp and 236 ft lbs. Now I make no promise but if it fwd maybe using there tranny and a widebody kit and a LOT of $$$$ it could be made to work. Or you could go 3800 and save a lot of $$$$. Enjoy

Suzuki Verona.

2.5 liter I-6 engine, mounted transverse. The cars were junk.

hmmmmmm. I wonder if I can fit an inline 5. I am thinking Audi.

quote Originally posted by darkhorizon: I hear 2JZ's fit just fine.

How about 2JZ's and a NAWS?? Then again that may attract too many Beyonces...

quote Originally posted by skstibi: hmmmmmm. I wonder if I can fit an inline 5. I am thinking Audi.

The older Audi 5cylinders are very long, but the new 2.5 5cylinder out of a Jetta V would fit nicely.
Dave

Why bother with a straight 6? I can understand the 5 but not the 6. The VR6 fits because of its unique configuration.

Hmm, I think I will look around. I wonder how much it would cost me to turbocharge one of those 2.5's.

Oh hell. Should I go for the death trap? 416 small block with a couple turbos?

[This message has been edited by skstibi (edited 06-10-2008).]