Getting close to being done with my swap harness. Just have a few questions. I owe fieroflyer a lot of thanks for helping me out and I've been watching the 3800a/c thread. It looks like its about worked out. Great people with great minds on here thats all I can say. OK enough sucking up heres my questions
a/c relay wires- dk blue- where does it hook to? green/white where does it go? does it get tied into the green/white from the C500 ran to the pcm black/white does this go to ground? dk green goes to the a/c compressor? Where does the black from a/c comp go?
PCM wiring- tied all blacks to the black from temp to use pin to go into pcm (factory wiring I believe)? tied grey's from map and tps together to use pin to go to pcm (factory also)? reused the thicker guage black with the 4 pins for pcm/ Does this ground the pcm? This is a manual swap. Thanks
IP: Logged
09:46 PM
PFF
System Bot
Matthew_Fiero Member
Posts: 2762 From: Winnipeg,Manitoba,Canada Registered: Aug 2001