Pennock's Fiero Forum
  Technical Discussion & Questions - Archive
  wheel size?

T H I S   I S   A N   A R C H I V E D   T O P I C
  
Email This Page to Someone! | Printable Version
wheel size? by achbaby
Started on: 04-23-2008 06:55 PM
Replies: 6
Last post by: achbaby on 04-23-2008 09:04 PM
achbaby
Member
Posts: 454
From: Wind Gap, PA.
Registered: May 2005

Feedback score:    (13)
Leave feedback

Rate this member
Report this Post04-23-2008 06:55 PM Click Here to See the Profile for achbabySend a Private Message to achbabyDirect Link to This Post
I currently have 17x7's on my stock 87GT suspension. Does anyone know if i would have any problems with
18x7.5's on my 87GT. thx jay
IP: Logged
PFF
System Bot
randye
Member
Posts: 14190
From: Florida
Registered: Mar 2006

Feedback score: (1)
Leave feedback





Total ratings: 210
Rate this member
Report this Post04-23-2008 07:00 PM Click Here to See the Profile for randyeClick Here to visit randye's HomePageSend a Private Message to randyeDirect Link to This Post
 
quote
Originally posted by achbaby:

I currently have 17x7's on my stock 87GT suspension. Does anyone know if i would have any problems with
18x7.5's on my 87GT. thx jay


Depends on the offset of the wheels.
IP: Logged
achbaby
Member
Posts: 454
From: Wind Gap, PA.
Registered: May 2005

Feedback score:    (13)
Leave feedback

Rate this member
Report this Post04-23-2008 07:14 PM Click Here to See the Profile for achbabySend a Private Message to achbabyDirect Link to This Post
they are 18x7.5..5x100, +35mm offset
IP: Logged
achbaby
Member
Posts: 454
From: Wind Gap, PA.
Registered: May 2005

Feedback score:    (13)
Leave feedback

Rate this member
Report this Post04-23-2008 07:34 PM Click Here to See the Profile for achbabySend a Private Message to achbabyDirect Link to This Post

achbaby

454 posts
Member since May 2005
anyone out there with 18's on a stock 87GT?
IP: Logged
Winkie
Member
Posts: 1159
From: bangor, PA
Registered: Feb 2007

Feedback score: (4)
Leave feedback

Rate this member
Report this Post04-23-2008 08:05 PM Click Here to See the Profile for WinkieClick Here to visit Winkie's HomePageSend a Private Message to WinkieDirect Link to This Post
Will it fit or not? I have never tried. It'll be close though. I want to say that it will but it will be really tight. But again I have never tried.

Ryan
IP: Logged
Fieroseverywhere
Member
Posts: 4242
From: Gresham, Oregon USA
Registered: Mar 2006

Feedback score:    (14)
Leave feedback





Total ratings: 89
Rate this member
Report this Post04-23-2008 08:07 PM Click Here to See the Profile for FieroseverywhereSend a Private Message to FieroseverywhereDirect Link to This Post
Shouldn't be a problem. You can check it out with this wheel offset calculator. Should be less then a 1/2 inch further inward.
http://www.1010tires.com/WheelOffsetCalculator.asp

Lots of guys run 18x8's +35mm with no problem so you should have no problem. Good luck.

[This message has been edited by Fieroseverywhere (edited 04-23-2008).]

IP: Logged
achbaby
Member
Posts: 454
From: Wind Gap, PA.
Registered: May 2005

Feedback score:    (13)
Leave feedback

Rate this member
Report this Post04-23-2008 09:04 PM Click Here to See the Profile for achbabySend a Private Message to achbabyDirect Link to This Post
thx guys!!!!!!!!!
IP: Logged



All times are ET (US)

T H I S   I S   A N   A R C H I V E D   T O P I C
  

Contact Us | Back To Main Page

Advertizing on PFF | Fiero Parts Vendors
PFF Merchandise | Fiero Gallery
Real-Time Chat | Fiero Related Auctions on eBay



 Copyright (c) 1999, C. Pennock