Pennock's Fiero Forum
  Technical Discussion & Questions - Archive
  sbc throttle cable bracket

T H I S   I S   A N   A R C H I V E D   T O P I C
  
Email This Page to Someone! | Printable Version
sbc throttle cable bracket by garage monster
Started on: 04-02-2008 02:56 AM
Replies: 4
Last post by: GKDINC on 04-02-2008 05:20 PM
garage monster
Member
Posts: 350
From: Rogue Valley, Oregon
Registered: Nov 2007

Feedback score: (1)
Leave feedback

Rate this member
Report this Post04-02-2008 02:56 AM Click Here to See the Profile for garage monsterSend a Private Message to garage monsterDirect Link to This Post
Small block Chevy with an Edelbrock Carb. Can anyone direct me to a picture of how to make or what bracket to use to hook the v6 throttle cable and the cruise control to the carb?
It would be much appreciated.

Thanks.
IP: Logged
PFF
System Bot
86SE
Member
Posts: 956
From: Omaha, NE, USA
Registered: Jan 2000

Feedback score: (1)
Leave feedback

Rate this member
Report this Post04-02-2008 04:12 AM Click Here to See the Profile for 86SESend a Private Message to 86SEDirect Link to This Post
I bought one like this one from jegs, http://www.jegs.com/i/JEGS/555/15231/10002/-1
IP: Logged
Oreif
Member
Posts: 16460
From: Schaumburg, IL
Registered: Jan 2000

Feedback score:    (19)
Leave feedback





Total ratings: 442
Rate this member
Report this Post04-02-2008 06:47 AM Click Here to See the Profile for OreifClick Here to visit Oreif's HomePageSend a Private Message to OreifDirect Link to This Post
Actually I used this exact one when I did my 3.4L:
http://www.jegs.com/i/JEGS/...0002/-1/752613|10313

and here is the TVS cable bracket:
http://www.jegs.com/i/JEGS/...0002/-1/752613|10313

If manual trans, This can be modded to fit the just the cruise cable:
http://www.jegs.com/i/JEGS/...0002/-1/752613|10313

Make sure you get the "GM" version and not the "FORD" version.

------------------

Happiness isn't around the corner...
Happiness IS the corner.
ZZ4 Powered !!

IP: Logged
Jake_Dragon
Member
Posts: 33026
From: USA
Registered: Jan 2001

Feedback score: (5)
Leave feedback





Total ratings: 403
Rate this member
Report this Post04-02-2008 07:23 AM Click Here to See the Profile for Jake_DragonSend a Private Message to Jake_DragonDirect Link to This Post
I used a modified stock bracket but it wouldn't let the secondaries open all the way at first, it will now but I have to keep it adjusted.
I like the bracket posted that uses 2 mounting holes instead of one, but being a cheap.. frugal person that I am I will probably try to make one.
For the cruise control I just hooked my foot to the gas peddle, it seems to work ok
IP: Logged
GKDINC
Member
Posts: 1813
From: East Tawas MI
Registered: Dec 2001

Feedback score: (5)
Leave feedback

Rate this member
Report this Post04-02-2008 05:20 PM Click Here to See the Profile for GKDINCSend a Private Message to GKDINCDirect Link to This Post
I'm useing the Edelbrock # 8030 to hold the cables. It lets me do throttle, cruise, and tv on the auto. It mounts with 2 of the intake manifold bolts. I'm running a Holley carb.
Good Luck
Gary
IP: Logged



All times are ET (US)

T H I S   I S   A N   A R C H I V E D   T O P I C
  

Contact Us | Back To Main Page

Advertizing on PFF | Fiero Parts Vendors
PFF Merchandise | Fiero Gallery
Real-Time Chat | Fiero Related Auctions on eBay



 Copyright (c) 1999, C. Pennock