Ok, this may sound silly, but how do I get the mounting piece out of this mirror? There's no set screw like on the stock piece. It's a GM mirror with auto dim and a compass.

I wanna just take this mounting piece off and use the one currently on the windshield. Took this picture earlier this week and it's been bugging me.

------------------
Whade' "The Duck Formerly Known As Wade" Duck
'87 GT Auto
'88 Ferrario
'84 Indy

From that pick it looks like there is a spring clip in there. Tried sticking a small screwdriver in there then sliding the mount out?

Right. you usually stick a small screwdriver or pick up the little slot in the middle between the metal mount and the mirror base and slide it off.

[This message has been edited by Dodgerunner (edited 02-24-2008).]

Hmm, I'll have to try again later. I tried to compress that little clip and it won't. Tried to expand the clip and it just moves around. I just hope I don't mess with it and I end up breaking the housing.

------------------
Whade' "The Duck Formerly Known As Wade" Duck
'87 GT Auto
'88 Ferrario
'84 Indy

I installed a GM auto-dim rear view mirror w/compass on my '86GT a couple of weeks ago. I used a small channel lock pliers to depress the clip. Worked fine for me.

Cajun