So advanced auto sells the 1995 camaro 3800 manual flywheel for Our Price: $51.99
Core Charge: $40.00
$91.99 without a trade in--
Then it's $100 for machining and another $100 for balancing?

West Coast Fieros flywheel and bolts is $323

hmmmmmm

My shop charged 120 for everything, about 40 to cut down and 80 to balance.

You can give them a fiero flywheel if your sneaky about it.

junkyard= $25est. for 96 camaro flywheel
why go wcf??

quote Originally posted by revin: junkyard= $25est. for 96 camaro flywheel why go wcf??

Still will need to be cut down/balanced to work with the Fiero. Spec is also making the 3800 Fiero flywheel.

quote Originally posted by MstangsBware: Still will need to be cut down/balanced to work with the Fiero. Spec is also making the 3800 Fiero flywheel.

would still need to be balanced to the flexplate that came off the donor engine??

I ordered mine from WCF. I recieved it within 2 weeks, and it was way easier than trying to find a flywheel, find someone to machine it, someone to balance it, etc. It may cost more, but it was easy.

team-race tech out there in canada was having a few problems with neutral balance flywheels.

quote Originally posted by braaap881: I ordered mine from WCF. I recieved it within 2 weeks, and it was way easier than trying to find a flywheel, find someone to machine it, someone to balance it, etc. It may cost more, but it was easy.

And you PAY for convenience. Down side is if thier flywheels are anything like thier mounts, that sucker will be going through the bellhousing................

Never had any problems with the Aluminum ones I sell. They all come balaned for what ever series engine you have. I have had some made for other applications like a V8 swap and such.

------------------

Street Legal Tuning.

Specializing in Fiero performance:
3800 swaps, custom Aluminum flywheels, Brakes, Engine's, Aftermarket Bolt on performance parts, used Fiero parts,
[/URL] e-mail: joetrentadue@hotmail.com[URL]

quote Originally posted by PURPLE REIGN: And you PAY for convenience. Down side is if thier flywheels are anything like thier mounts, that sucker will be going through the bellhousing................

This might have been true about 3-4 years ago but not today. I have ordered several sets of WCF mounts here recently and they are on top of it now. I was leary about ordering from them being the first set I had from them was full of pin holes in the welds and needed some work(these where from years ago). But I can tell you now that there mounts are nice, with clean welds, line up, they offer the late model 65E trans mount and there shipping is pretty fast.

This is what I have seen of WCF and there products as of todays times.

OOOOOhhhhh OOOOOhhhhh. I need a flywheel for my SC S1. it's externally balanced. so I can't use a fancy balanced flywheel. it would need to match my flex plate imbalance.

Do you have?

I would have to agree about the mounts. I have a set from them and they are stout. I did talk with them about a flywheel for my motor and all they where going to do was have me send them my pre 88 flywheel and my 3.8 flex plate and weld up the fiero 2.8 bolt holes and redrill for the 3.8 holes with the imbalance in the proper place. I was like "Thats all I get for how much?!!" LOL.

[This message has been edited by BoostedSeries1 (edited 11-05-2007).]

When I have the flywheels made, I do require the stock 3800 flex plate for match balancing. That goes also for V8's too.

------------------

Street Legal Tuning.

Specializing in Fiero performance:
3800 swaps, custom Aluminum flywheels, Brakes, Engine's, Aftermarket Bolt on performance parts, used Fiero parts,
[/URL] e-mail: joetrentadue@hotmail.com[URL]

I've got a bag of those flywheel bolts if you want some PM me.

i sold some a while back and the shipping was more than the bolts if i remember correctly

call me.

JC

I have been buying my flywheel bolts from Brofasco..

quote Originally posted by jeffndebrus: West Coast Fieros flywheel and bolts is $323 hmmmmmm

Last I knew WCF's 3800 flywheel ISN'T balanced. It's just cut down. You can get away with this in many cases, BUT NOT ALL. Mine had to be balanced. So you'll still have to pay the $80-$100 to get the flywheel balanced.

I've used RaceTech's aluminum flywheel and strapped it to my series II and it worked beautifully. That was over 5 years ago.

quote Originally posted by JCUOIT: I've got a bag of those flywheel bolts if you want some PM me. i sold some a while back and the shipping was more than the bolts if i remember correctly call me. JC

Are they new or used bolts?
If they are new, I'll take 8