Just wondering if anybody has any pictures of belt routing using the stock alt location and or no ac. I am mainly concerned with the routing with no ac compressor and is it possible with out it? If not I guess I will put my alt in the compressor location?

You could always keep the stock routing and get an AC delete idler pulley

That would be so easy...it needs to be harder...damn I'm dense sometimes.

[This message has been edited by goatnipples2002 (edited 07-27-2007).]

The alt in the compressor location is a good idea but you can run it in the stock location, just need to make up an idler for the PS location to clear every thing. Dan

------------------


Signature compliments of F-I-E-R-O
2003 3800SC series II powered
www.photosled.com/showgallery.php/cat/631
www.photosled.com/showgallery/cat/1583

any one make a bracket to put it in the ps location?

quote Originally posted by chrisgtp: any one make a bracket to put it in the ps location?

going to have to say no on that one, never ran across one before. I know there is a swap around town here that has the PS pump just running dry, you might be able to knock it around some way to just let it freespin and not pump anything.

I'm going to have to say yes..

fiero addiction offered one on ebay a couple weeks ago..

not there now though.. but he definately had one for sale.

Make your own it is easy all I use is 1/4" plate and some 1" square stock and weld it all up. I use one on all my swaps it is the last thing I make so I can calculate the size belt I need and instal it. There is a few photos some where in the link below my sig showing it. Dan

------------------


Signature compliments of F-I-E-R-O
2003 3800SC series II powered
www.photosled.com/showgallery.php/cat/631
www.photosled.com/showgallery/cat/1583