Pennock's Fiero Forum
  Technical Discussion & Questions - Archive
  Heater Module Assembly - 1984

T H I S   I S   A N   A R C H I V E D   T O P I C
  
Email This Page to Someone! | Printable Version
Heater Module Assembly - 1984 by donohue419
Started on: 07-09-2007 07:56 AM
Replies: 5
Last post by: donohue419 on 07-12-2007 10:20 PM
donohue419
Junior Member
Posts: 4
From: Inverness, IL, US
Registered: Jul 2007

Feedback score: N/A
Leave feedback

Rate this member
Report this Post07-09-2007 07:56 AM Click Here to See the Profile for donohue419Send a Private Message to donohue419Direct Link to This Post
I ned help in removing the heater module/box for a 1984 Fiero with air conditioning. I have already removed the dash. Thanks in advance for the help.
IP: Logged
PFF
System Bot
fierohoho
Member
Posts: 3494
From: Corner of No and Where
Registered: Apr 2001

Feedback score: (3)
Leave feedback





Total ratings: 221
Rate this member
Report this Post07-09-2007 01:10 PM Click Here to See the Profile for fierohohoSend a Private Message to fierohohoDirect Link to This Post
Welcome to the forum.

The heater box when unbolted will come out from the front in the spare tire area not through the interior.

You do have to remove the ducting and control cable and wiring from the inside under dash area but it's bolted to the firewall from the front.

Steve
IP: Logged
donohue419
Junior Member
Posts: 4
From: Inverness, IL, US
Registered: Jul 2007

Feedback score: N/A
Leave feedback

Rate this member
Report this Post07-09-2007 01:30 PM Click Here to See the Profile for donohue419Send a Private Message to donohue419Direct Link to This Post
Steve,

Thanks for your note.

I have the box unbolted and have tried to remove the box from the front not from the inside. It appears to get stuck on the cover case top. I will try to remove that to see if it clears without the cover case attached. Anything that I am missing?

Mike
IP: Logged
donohue419
Junior Member
Posts: 4
From: Inverness, IL, US
Registered: Jul 2007

Feedback score: N/A
Leave feedback

Rate this member
Report this Post07-09-2007 08:01 PM Click Here to See the Profile for donohue419Send a Private Message to donohue419Direct Link to This Post

donohue419

4 posts
Member since Jul 2007
Steve,

I followed your advice below:

- unbolted heater box from the front in the spare tire area

- remove the ducting (top left side and by the heater core on the side), control cable and wiring from the inside under dash area

The box moves forward but does not want to come out. Do I need to remove anything else?

Thanks

Mike
IP: Logged
fierohoho
Member
Posts: 3494
From: Corner of No and Where
Registered: Apr 2001

Feedback score: (3)
Leave feedback





Total ratings: 221
Rate this member
Report this Post07-12-2007 01:41 PM Click Here to See the Profile for fierohohoSend a Private Message to fierohohoDirect Link to This Post
Mike,

Sorry it took so long to respond, been a busy week.

If you have to, use a mirror to look all the way around the inside and front side of the box to make sure it's all disconnected and nothing is hanging up.

I don't recall how it has to tilt if at all to come out forward into the spare tire area.

Sorry I can't be of more help but LMK what you find.

Steve
IP: Logged
donohue419
Junior Member
Posts: 4
From: Inverness, IL, US
Registered: Jul 2007

Feedback score: N/A
Leave feedback

Rate this member
Report this Post07-12-2007 10:20 PM Click Here to See the Profile for donohue419Send a Private Message to donohue419Direct Link to This Post
Steve,

I can undersatnd that you are busy. No need to apologize.

Thanks for the advice. I will try it again this weekend.

Have a graet weekend.

Mike
IP: Logged



All times are ET (US)

T H I S   I S   A N   A R C H I V E D   T O P I C
  

Contact Us | Back To Main Page

Advertizing on PFF | Fiero Parts Vendors
PFF Merchandise | Fiero Gallery
Real-Time Chat | Fiero Related Auctions on eBay



 Copyright (c) 1999, C. Pennock