Does anyone, besides Truelo and the Fiero-Store, make a decent 'Y'-Pipe for stock replacement, ('87- 2.8 V-6). As the stocker is squished at the junction, I'd like something a little less restrictive. Manufactures/Hobbiests?

And you don't want to port it?

I was thinking a good way to port the existing y-pipe is to cut in from the "crotch" of the "y". this should cut out most of the crimp.

The "Fiero Store" picture looks good from the outside, but I e-mailed-em to ask for more details..........

Just a little FYI, we dont sell our Y pipe by its self since it wont work with the stock or any other headers besides ours. If you weld a repair to your stock Y pipe make sure you have a good welder do it so it dont crack later.

When I had the 3.4L I had the "Y" pipe ported at a local exhaust shop for $50
They cut it open poted it and welded it back up in just an hour.
The Fiero Store is just coated not ported.

[This message has been edited by Oreif (edited 02-02-2007).]

Then............How about somebody out there with a stock 'Y' pipe for a reasonable price?.......PayPal?