Good ol' ebay has Walbro High flow(pressure) fuel pumps for about $100, and Hollys are about $160 i think....
Anyone have good or bad experience with either?

Thanks

I have used both the funny thing is that on the actual pump they both say Walbro this is also true with Mallory pumps have had customers bring me all three different pumps they bought from different places but all were Walbro pumps. Dan

------------------


Signature compliments of F-I-E-R-O
2003 3800SC series II powered
www.photosled.com/showgallery.php/cat/631

Walbro made the carb on my tractor with a briggs & Stratton engine. These boys really get around.

Do you all have a part number to which Walbro pump one would recommend buying if say they had an 88 fiero( so the larger tank) and might be planning to put in either a V8 n* or 3800?

Thanks in advance for your time.
Ken

They all look similar in the photos...was wondering if they were the same pump rebranded.
Thanks for the info

The ad on ebay says # F2000169 fuel pump and 400-1016 install kit

Here's a non ebay Walbro dealer http://www.jdsperformance.com/index.asp?initemuid=437&fcmd=item&inmake=0

They have 255LPH in regular and high pressure.

By the Walbro website, looks like they make everything!

[This message has been edited by Joe Torma (edited 11-29-2006).]