Injector flow capacity from different swap motors...

Click here to visit The FieroStore | View all sponsors

Pennock's Fiero Forum

Technical Discussion & Questions - Archive

T H I S I S A N A R C H I V E D T O P I C

Email This Page to Someone! | Printable Version

Injector flow capacity from different swap motors... by perry rhodan

Started on	: 05-31-2006 07:49 PM
Replies	: 1
Last post by	: SpeedDemon on 06-01-2006 12:34 AM

perry rhodan
Member

Posts: 802
From: Roxton Pond, Quebec,Canada
Registered: Apr 2006

Feedback score: (5)
Leave feedback

Rate this member

Report this Post05-31-2006 07:49 PM

Click Here to visit perry rhodan's HomePage

I want to do a list of injector flow rate capacity for some donor car engine we can use in our swap.

I will start the list...correct me if I'm wrong...also I dont know at which pressure manufacturer test the perf of their injectors.

Fiero 2.8 = #15 injectors 15 lbs/hr

GM 3.4 (RWD) = #17 injectors 17 lbs/hr

Grand AM Ram Air 3400 (2002/2003) = maybe #19 injectors 19 lbs/hr (tested at 3 bars/43 PSI)

GM 3.4 DOHC = ????

[This message has been edited by perry rhodan (edited 05-31-2006).]

IP: Logged

PFF

System Bot

SpeedDemon
Member

Posts: 189
From: Calgary, AB
Registered: Mar 2003

Feedback score: N/A
Leave feedback

Rate this member

Report this Post06-01-2006 12:34 AM

Perhaps someone can confirm this, but I believe that the Multitec2 injectors that were used in 3400 were indeed 19lbs, but because they are a different style injector, they would run alot richer than a 19lb injector from a NA 3800 if you were to swap them in (perhaps they could work with a custom chip?).

Chris

IP: Logged

All times are ET (US)


T H I S I S A N A R C H I V E D T O P I C

Advertizing on PFF | Fiero Parts Vendors
PFF Merchandise | Fiero Gallery
Real-Time Chat | Fiero Related Auctions on eBay

Copyright (c) 1999, C. Pennock