Anyone know the length of the pressure plate bolts I need for a 3800 S/C swap using a modified Camero flywheel? I know they're M8X1.25 but don't know the length.

Thanks,
Aaron

Aaron,
look up fiero 3800 group on yahoo. There is some person there that will sell the correct bolts or give you the info you need. sorry I don't know the excat address. good guys there!

You are gonna love the 3800sc in the car

------------------

88 GT, 3800SC, Getrag 5sp. Custom

[This message has been edited by revin (edited 06-23-2005).]

Yep, name is David Kerr, I bought mine from him. So far so good!

thanks guys, I sent him an email.

I can't wait to get this thing in the car. I'm new to this stuff, but the forum's been a huge help and I'm lucky to know people around here that are helping me out as well. I've currently got the 2.8 strippd and ready to be taken out but am having a difficult time getting the cradle bolts to budge. Even with an impact they're not moving. I'm gonna try some heat on them and hopefully they'll respond to that.

Did you get a response yet? If I remember correctly it was 7/8". However you should double check using micrometer.

I'm just now finishing up a similar swap 01 GM 3.8 (Yes, with mods ;-) with 5 spd manual in 88 Formula. Any one know what starter to use and does anyone have any exhaust headers for sale for this??

Thanks, Bob

According to David Kerr "They must be 25mm long and have 2mm washers." I just got them from him since his price was good and he gave me the information. <dave@davidkerrassociates.com> if anyone else needs a set I believe he has some left.

The starter I'm using is the stock one. I was lucky enough to find an engine with everything I needed still attached to it (even the wiring harness).

hehe, I'll make you feel bad and just tell you I ordered a box of 50, i tried selling the rest, but i would have given you them for free if you wanted

DOH!!! Oh well... There's a lot more expensive things than bolts for this swap

What else do you need? I'm heading up to MD tommorow to pick up some parts from lowfierogt.