Greetings All, I have an '84 Fiero SE that I just installed a new throttle cable in, and to get to it I had to tear out the heater control panel and radio. I have the control panel hooked back up and am ready to put the radio back in and don't remember the order the 3 wire harnesses go. It is a stock AM/FM Cassette and has 3 connectors, Black, White, and Blue- all the same type of connector, probably speakers? Anyone know the order top to bottom? I appreciate your help! Patrick
They LOOK like they'll go in any way you want, but they'll actually only go in one way! But anyway: If you're looking at the back of the unit, with the connectors on the right, the blue is on top, white in the middle, and black on bottom.
i have a simular question. in my 84 the cassette quit working but the radio worked fine. my friend gave me another radio with a working cassette deck - looks just the same, but with amber lights rather than green - real cool in the dark and matches my instrument panel. BUT the memory doesnt work - i get 1200 when i turn the car back on and i lose all my fm channels - did i hook up the cassette deck wrong or what? thanks in advance jon
------------------ I'm the original owner of a white ' 84 2M4 purchased Dec 10, 1983 from Pontiac. Always garaged, no rust, 4-wheel drifts are fun!
btw, the pin identifications for the oem stereos can be found here-it's the 12 pin. Also shows the more recent pin info. http://www.corvetteradios.com/Page.html
