If you do the vette brake conversion, you get to use vette sized rims right? And what are they? 18's? ...... 19's?

For the 13" brakes, I think you need a minimum of a 17" wheel.

------------------

1988 Quad 4 Coupe 5 speed click for more pics
1986 GT 5 speed
AOL: LastMinuteBastrd AIM: SavedbyJebus

Yes, I'm aware of that. But what I'm asking is if I can go shopping for corvette wheels instead of going by size. It will greatly speed up things.

If you go shopping for Corvette wheels then you need to also go shopping for Corvette hubs, because they have a different bolt pattern... 4.75" x 5

BubbaJoeXXX has made the hub swap and is running Corvette wheels but it doesn't look like an easy bolt on mod.

not sure about the early cars but if yours is an 88 I know you can redrill the front hubs for the larger 5 x 4.75 pattern. the rears will require adaptors however as the hubs aren't large enough on early or late cars.
page 2 of my thread : https://www.fiero.nl/forum/Forum2/HTML/054893.html

Cheers,
Russ

I'm not sure about the newer Vettes, someone please correct me if i'm wrong. But for usual, rwd cars have very different wheel offset than our Fieros. The Vette wheels may stick out an inch or two from a Fiero fender...

------------------

88 Formula, T-Top, 5 spd | 68 GTO | 80 Jeep CJ7
..I live where the fine chocolates come from..