Pennock's Fiero Forum
  Technical Discussion & Questions - Archive
  Ebrake Handle Repair/Replace?

T H I S   I S   A N   A R C H I V E D   T O P I C
  
Email This Page to Someone! | Printable Version
Ebrake Handle Repair/Replace? by ezramore
Started on: 08-10-2004 12:01 PM
Replies: 1
Last post by: tesmith66 on 08-10-2004 12:58 PM
ezramore
Member
Posts: 338
From: colorado springs co
Registered: Oct 2003

Feedback score: N/A
Leave feedback

Rate this member
Report this Post08-10-2004 12:01 PM Click Here to See the Profile for ezramoreSend a Private Message to ezramoreDirect Link to This Post
How Is the black plastic ebrake handle remove. The one on mine falls of and i cant get it to stay on. The one i found at the junk yard i cant get off. Is there a procedure for this.

------------------
Ezra
88 Fiero 2M4 90000 Miles

IP: Logged
PFF
System Bot
tesmith66
Member
Posts: 7355
From: Jerseyville, IL
Registered: Sep 2001

Feedback score: (3)
Leave feedback





Total ratings: 135
Rate this member
Report this Post08-10-2004 12:58 PM Click Here to See the Profile for tesmith66Send a Private Message to tesmith66Direct Link to This Post
There are 2 bolts that hold it to the verticle part of the rocker panel. You will have to remove the brake light connector to get to the rear bolt. The bolt heads are 13mm. The hardest part is getting the cable released from the brake lever base. You have to squeeze 3 tabs in order to get the cable through the hole.

------------------
1986 SE 350 V8

IP: Logged



All times are ET (US)

T H I S   I S   A N   A R C H I V E D   T O P I C
  

Contact Us | Back To Main Page

Advertizing on PFF | Fiero Parts Vendors
PFF Merchandise | Fiero Gallery
Real-Time Chat | Fiero Related Auctions on eBay



 Copyright (c) 1999, C. Pennock