I wanted to pressure wash the whole entire engine before installing
I did actually get a chance to sneak off and wash the cradle after pleading. The valve covers need to be re did something like powder coated
Red is a excellent color.
And about the clearance my mounts dont need a dogbone nor to be solid mounted I put alot of messuring and thought into those mounts the sizes were coppied from my 4.9 mounts. My car is currently running fine with that setup.
[This message has been edited by 86fieroEarl (edited 07-30-2004).]
Hope is solid mounted. Those clearances seem tight for that torq monster
