I have an 86' GT that I bought the cruise control servo from the firero store. They sell 1 replacement for all years. I got it in and it looks like an exact replacement for my 88' GT but my 86' GT has a more square looking servo. Does this make sence to anyone? Should they look the same? Any help would be great.

bump

They are identical for all years. Here's what the stock one looks like:

Note, the arrow is pointing to the vent solenoid, not the cruise servo above it.

JazzMan

[This message has been edited by JazzMan (edited 07-21-2004).]

The arrow should point to the round diaphram type device. The way it is now, the pic shows the cruise solenoid and not the servo. Good luck.

Phil

------------------
86 GT TTops, 3.4 Auto.....bought from Doug of Fiero Warehouse

GM auto tech for 27 years. Specializing in electrical and computer problems. I will never be able to return as an auto tech again. I get EXTREME satisfaction helping others and will go to Extreme levels to help you if you need help. I have LOTS of free time on my hands. This forum and the help I give, allow me to have a purposeful life. Bring on the problems......LOL.

Actually, the picture is recycled and I didn't state in my post that I was pointing at the cruise servo. Just to avoid confusion I'll edit my post to reflect that the arrow is pointing to the vent solenoid.

JazzMan