what GM front wheel drive cars used a 9 11/16 clutch?

Bump....doesn't anyone know the answer to this?

None.

The 9 & 11/16 clutch was used in S10's.

------------------
'87 Fiero GT: Low, Sleek, Fast, and Loud
'90 Pontiac 6000 SE AWD: None of the Above

Luck, Fate and Destiny are words used by those who lack the courage to define their own future

I had one in my turbo Fiero. I got it from a place in CA. called "The Clutch Shop", but this was many years ago (1992-3?)......Paul

Lumina's I beleve had them, not positive though

quote Originally posted by 86GT3.4DOHC: Lumina's I beleve had them, not positive though

The DOHC setup uses a completely different clutch. (Pull to release)

------------------
'87 Fiero GT: Low, Sleek, Fast, and Loud
'90 Pontiac 6000 SE AWD: None of the Above

Luck, Fate and Destiny are words used by those who lack the courage to define their own future

[This message has been edited by Will (edited 06-10-2004).]

I know that the 91 lumina z-34 3.5 tohc uses this size. Are there any others that use tis size in a fwd? The 94 3.4 camaro uses this size BUT when you bolt up the pressure plate the relese fingers sit 1/2 in. too high. that means the clutch wont fully engage. the 83 camaro 2.8 has the correct disc. but havent looked at the pressure plate as of yet. Any other idias?

quote Originally posted by 2-tone: I know that the 91 lumina z-34 3.5 tohc uses this size.

The size may be the same but the clutch itself is totally different. The TDC/DOHC clutch is a pull to release design.

www.westcoastfiero.com sells a 9 & 11/16 clutch for Fieros.

Major clutch manufacturers like clutchnet and centerfarce would probably be willing to make you one if you asked nicely and paid them a little more.

What's your application? Why do you think you require the 9 & 11/16" clutch?

[This message has been edited by Will (edited 06-10-2004).]

quote Originally posted by Will: The DOHC setup uses a completely different clutch. (Pull to release)

If you are mating it to the original tranny yes, but If oyu use the stock Fiero tranny it is still push to release.

------------------
Dave E

www.ltlfrari.com

4.9 pfi. want a little more grab for my set up.

Interesting note:
Fiero 9 1/8 pressure plate 1600 lbs clamping force
Camaro 9 11/16 pressure plate is only 1200
Does the size out weigh the loss of clamping force

I got those specs directly from our clutch supplier, I work at advance auto

I never said the lumina would WORK, just said it was the size. More about if it'll work or not thought please

how about a 1990 pontiac gran-prix 3.1 v-6 9 11/16 clutch? it also uses the 1x14t spline disc?-B-