I'm installing an alarm system on my Fiero, and I'd love to have info on all the wires which are necessary for the alarm (IE: starter wires, etc). Mainly I need to know which 2 cables control the starter (my diagram says from the on position there's a yellow one, and from the "start" position there's a red one.), and it shows a diagram for setting up the use of the parking lights for flashing, yet it wants a seperate relay. Any idea on how to go about this? I'll post some pics if I can.

Easiest place to find and tap into these wires is under the steering column in a big harness. They are wrapped with black tape. What I do is use a test light and check them with ign off and with ign on. These are fairly big gauge wire. It's easiest to get to the park light wiring at the HL switch. I've got all the GM Fiero manuals. I can email you any wiring schematic you need or if you need any other help, just email me at skyhawk@moonstar.com. Good luck.

I used to live in Burke a long time ago.....lol.

Phil

------------------
87 FIERO GT 2.8 5spd

GM auto tech for 27 years. Specializing in electrical and computer problems. Now on workers comp. and it looks like I will be unable to return to work as a tech.

Those colors are correct.

Try here if you need more (found this surfing for other info):

FIERO Wiring Diagrams

------------------
Steve, 87 Fiero GT, Getrag w/Ultimate Shift Kit, Street Dreams drop spindles, Poly mounts, KYBs, Michelin tires, Ocelot exhaust, Infinity audio, DashScan

Thanks guys, I'll see if that's all I need.

+ to everyone

You can pick up the wire from the steering column.

How so? I figured if it was at all possible to use the wires running in the center console, then that'd be the easiest as that's where I'll be mounting the "brain" for the alarm.