This is getting frustrating and irritating. I fix something that other appearsˇK This never ends.
The engine was working fine but an ECM code appears. I check the code and was the CTS, then verify the wires and get some un-constant readings. I reset the ECM and when try to fire it up again it didnˇ¦t start. I replaced the ECM but no luck, didnˇ¦t start. I look all over and the only thing I found was the AC compressor wires melted!!! I cut the wires to where they where good and leave them disconnected also take off the AC relay in case of. But it still w/o start. When I keep cranking the engine a gas smell start to appear, this tells me that the fuel is been delivered to the pistons. Also that tells me that there is problem with spark. Can a faulty DIS do this??????
Any other lead???
I BEG FOR HELP!!!!! SEND A FATHER TO DO THE EXORCISM TO MY FIEROOOO!!!!! !! FAAASSSTTTT!!!!!!
BTW, I named my Fiero The Exorcist.
The frustrated/doomed/with out luck/in need for help DreX 
[This message has been edited by DreXteR (edited 10-11-2003).]