Pennock's Fiero Forum
  Technical Discussion & Questions - Archive
  Wanted: 4t60e or 4t65e Technical Documents

T H I S   I S   A N   A R C H I V E D   T O P I C
  
Email This Page to Someone! | Printable Version
Wanted: 4t60e or 4t65e Technical Documents by ryan.hess
Started on: 07-08-2003 05:17 PM
Replies: 5
Last post by: ryan.hess on 07-10-2003 08:25 PM
ryan.hess
Member
Posts: 20784
From: Orlando, FL
Registered: Dec 2002

Feedback score: (1)
Leave feedback





Total ratings: 319
Rate this member
Report this Post07-08-2003 05:17 PM Click Here to See the Profile for ryan.hessSend a Private Message to ryan.hessDirect Link to This Post
Just what the title says... If you've got a Helms technical manual for a grand prix for a 3800 swap or something, and it mentions the tranny, please, PLEASE let me know! I'm interested in making a TCM for the 60e or 65e. Specifically need information on solenoids and shifting... Let me know what you have,
IP: Logged
PFF
System Bot
ryan.hess
Member
Posts: 20784
From: Orlando, FL
Registered: Dec 2002

Feedback score: (1)
Leave feedback





Total ratings: 319
Rate this member
Report this Post07-08-2003 10:08 PM Click Here to See the Profile for ryan.hessSend a Private Message to ryan.hessDirect Link to This Post
Need some help folks... whatcha got?
IP: Logged
scrabblegod
Member
Posts: 1014
From: Lexington, KY
Registered: Jun 2003

Feedback score: N/A
Leave feedback





Total ratings: 58
Rate this member
Report this Post07-08-2003 10:28 PM Click Here to See the Profile for scrabblegodSend a Private Message to scrabblegodDirect Link to This Post
Do you need info on which solenoids are engaged in each gear and wiring for the torque converter?
If so, I will scan them and post them in the morning.

Until I decided to go with a 5spd instead of the auto, I was working on a controller that would allow the trans to shift from the ECM or with the flip of a switch, allow up or down shifting with the push of a button.

IP: Logged
ryan.hess
Member
Posts: 20784
From: Orlando, FL
Registered: Dec 2002

Feedback score: (1)
Leave feedback





Total ratings: 319
Rate this member
Report this Post07-09-2003 01:46 AM Click Here to See the Profile for ryan.hessSend a Private Message to ryan.hessDirect Link to This Post
Yes! That's just what I need! And any other information on the tranny that might be helpful... Thanks!!

 
quote
Originally posted by scrabblegod:

Do you need info on which solenoids are engaged in each gear and wiring for the torque converter?
If so, I will scan them and post them in the morning.

Until I decided to go with a 5spd instead of the auto, I was working on a controller that would allow the trans to shift from the ECM or with the flip of a switch, allow up or down shifting with the push of a button.

IP: Logged
ryan.hess
Member
Posts: 20784
From: Orlando, FL
Registered: Dec 2002

Feedback score: (1)
Leave feedback





Total ratings: 319
Rate this member
Report this Post07-09-2003 01:57 PM Click Here to See the Profile for ryan.hessSend a Private Message to ryan.hessDirect Link to This Post

ryan.hess

20784 posts
Member since Dec 2002
bump back to the top...
IP: Logged
ryan.hess
Member
Posts: 20784
From: Orlando, FL
Registered: Dec 2002

Feedback score: (1)
Leave feedback





Total ratings: 319
Rate this member
Report this Post07-10-2003 08:25 PM Click Here to See the Profile for ryan.hessSend a Private Message to ryan.hessDirect Link to This Post
scrabblegod... sent you an email.
IP: Logged



All times are ET (US)

T H I S   I S   A N   A R C H I V E D   T O P I C
  

Contact Us | Back To Main Page

Advertizing on PFF | Fiero Parts Vendors
PFF Merchandise | Fiero Gallery
Real-Time Chat | Fiero Related Auctions on eBay



 Copyright (c) 1999, C. Pennock