I took the intake fuel line loose from the schrader valve, and can't get to go back. I totally removed the line so I could have it cleared with high pressure air. I can not get it aligned so the fitting will go into the hole. The pipe has several bends and I can not get it turned the proper direction. Anyone have a picture. Does the intake line cross over or under the return line? Thanks for any help. If this was a Duke it would have been running 2 weeks ago.

Here's another pic of the fuel lines:
http://web2.airmail.net/jsavage1/formula/morefuellines.jpg

Let's see if this works:

JazzMan

[This message has been edited by JazzMan (edited 06-14-2003).]