I am putting all new poly in my 88 GT and i need the torque values for the rear trailing arms and the swaybar endlinks. Can someone look in there 88 service manual and let me know what they are.

Thanks
Chris

Not really sure but will give you a bump to the top and usually people will give some good info if they see someone like me leading you down the wrong path! LOL

I did my 88 coupe and just tightened everything back up to what I considered super snug. I wouldn't think the torque values on these bolts would be critical.

------------------

http://www.geocities.com/fierorulz/fieropage.html

quote Originally posted by DRA: Not really sure but will give you a bump to the top and usually people will give some good info if they see someone like me leading you down the wrong path! LOL I did my 88 coupe and just tightened everything back up to what I considered super snug. I wouldn't think the torque values on these bolts would be critical.

DRA is correct, they just need to be tight enough so they dont come undone, and not soo tight that you streatch them.

i am going out to my car to get the manual right now anywho.

[This message has been edited by pred1tor83 (edited 08-24-2003).]

Outer tie rod to steering knuckle nut
15 plus 1/2 turn

rear toe link rod nut 30-39
Stabilizer bar link bolt 144in/lbs
stabilizer bar bushing clamp mounitng bolts 20
i can email the pic to you, but i cant get pip to work i would post the whole page....

[This message has been edited by pred1tor83 (edited 08-24-2003).]