Take a look at my sig. Just figure I would see what you guys think! I would estimate 350+ h.p.

------------------
,86 GT poly suspension.
357 c.i. sbc 4 bolt 010 block, steel crank, x rods, arp, Fed Mog. 9.25:1 Hypers, 882's,XE 256 with 1.6 rollers. Weiand excellerator w/ divider plate. Carter 750. Headers And all the goodies. 375 h.p.Soon to hit the street!

I can't give you any kind of estimate without knowing what heads you have (does the 882 mean you have casting number 882 heads?) or valve size. Any porting done to the heads? We especially need to know your cam specs.

882 is the head casting. As of now there isnt any porting or polshing.the cam, well i dont have the specs here at work . It is the an xtreme energy 256 cam, w/ i1.6 roller rockers my compression after doing some math is 9.25:1 the weiand excellerator is the high rise with a divider plate turning it into a daul plane and the divider is going to get a 1" notch. I definetly need to do some gasket matching before it goes in the GT.

------------------
,86 GT poly suspension.
357 c.i. sbc 4 bolt 010 block, steel crank, x rods, arp, Fed Mog. 9.25:1 Hypers, 882's,XE 256 with 1.6 rollers. Weiand excellerator w/ divider plate. Carter 750. Headers And all the goodies. 375 h.p.Soon to hit the street!