Have you tried mounting the Fiero select lever and shift lever on the Quad 4 transaxle. I think that end of the case is identical to the Fiero Getrag I'm wondering if you need Rodney's FWD conversion kit at all.The stock Fiero Getrag shift and select levers will bolt to the Quad 4 Getrag as it is the same as the FWD Getrag and in a sense the same as a Fiero Getrag. But the shift arm that comes out of the case is 11 mm shorter on the FWD Getrag and Quad 4 Getrag. You will not be able to get into 1st or second gear. You would be able to get 3-4-5 and reverse.
------------------
PLEASE NOTE MY NEW ADDRESS
Rodney Dickman's Fiero accessories
www.rodneydickman.com
New address and phone number after June 20,2003:
Rodney Dickman's Fiero acc's
7604 Treeview Drive
Caledonia, WI 53108
(262) 835-9575