Pennock's Fiero Forum
  Technical Discussion & Questions - Archive
  SD-4 Valve Covers???

T H I S   I S   A N   A R C H I V E D   T O P I C
  
Email This Page to Someone! | Printable Version
SD-4 Valve Covers??? by FastIndyFiero
Started on: 04-24-2003 05:13 PM
Replies: 2
Last post by: The_Stickman on 04-25-2003 08:43 PM
FastIndyFiero
Member
Posts: 2546
From: Wichita, KS
Registered: Aug 2002

Feedback score: N/A
Leave feedback





Total ratings: 70
Rate this member
Report this Post04-24-2003 05:13 PM Click Here to See the Profile for FastIndyFieroClick Here to visit FastIndyFiero's HomePageSend a Private Message to FastIndyFieroDirect Link to This Post
The old valve cover on my duke is looking pretty bad, large dents, etc...

So, I was looking through and Edelbrock catalog and noticed the SD-4 valve cover. Emissions equipment isn't any concern to me anymore as I'm running a carb and no ECM. I also have no issues with external clearence.

Is this valve cover just a bolt on deal, require some modifications, or does it use a different bolt pattern altogether?

Thanks,
Nate

------------------

IP: Logged
PFF
System Bot
Oreif
Member
Posts: 16460
From: Schaumburg, IL
Registered: Jan 2000

Feedback score:    (19)
Leave feedback





Total ratings: 442
Rate this member
Report this Post04-24-2003 06:49 PM Click Here to See the Profile for OreifClick Here to visit Oreif's HomePageSend a Private Message to OreifDirect Link to This Post
It is a 2-piece valve cover that bolts onto the engine with no problem. There are some things that need to be moved. T-top Fiero has one on his. Here is a link to pics and install help.
https://www.fiero.nl/forum/Forum1/HTML/027197.html

------------------

Happiness isn't around the corner...
Happiness IS the corner.

IP: Logged
The_Stickman
Member
Posts: 93
From: Allentown Pa USA
Registered: Jan 2003

Feedback score: N/A
Leave feedback

Rate this member
Report this Post04-25-2003 08:43 PM Click Here to See the Profile for The_StickmanClick Here to visit The_Stickman's HomePageSend a Private Message to The_StickmanDirect Link to This Post
The SD-4 valve cover bolts right on. Two things need to be done. One get a hole saw to make a hole for PVC valve. Two the temp sensor needs some work because the valve cover is right over it. You could also add that sensor to the goose neck with the other sensor that is already there.

------------------
The Stickman

http://members.tripod.com/~TheStickman/SnTsFieros.html

IP: Logged



All times are ET (US)

T H I S   I S   A N   A R C H I V E D   T O P I C
  

Contact Us | Back To Main Page

Advertizing on PFF | Fiero Parts Vendors
PFF Merchandise | Fiero Gallery
Real-Time Chat | Fiero Related Auctions on eBay



 Copyright (c) 1999, C. Pennock