Pennock's Fiero Forum
  Technical Discussion & Questions - Archive
  Pressure Plate to Flywheel Bolt Torque Specs?

T H I S   I S   A N   A R C H I V E D   T O P I C
  
Email This Page to Someone! | Printable Version
Pressure Plate to Flywheel Bolt Torque Specs? by Synthesis
Started on: 04-03-2003 02:51 PM
Replies: 2
Last post by: avengador1 on 04-03-2003 09:32 PM
Synthesis
Member
Posts: 12207
From: Jordan, MN
Registered: Feb 2002

Feedback score:    (19)
Leave feedback





Total ratings: 294
Rate this member
Report this Post04-03-2003 02:51 PM Click Here to See the Profile for SynthesisSend a Private Message to SynthesisDirect Link to This Post
Hey guys. Can't find my Haynes manual.. Need the Pressure plate to Flywheel torque specs for the bolts, and the bellhousing to block specs as well if possible.. About to reassemble the engine and tranny and drop it back onto the cradle...
IP: Logged
PFF
System Bot
watts
Member
Posts: 3256
From: Coaldale, AB, Canada
Registered: Aug 2001

Feedback score: N/A
Leave feedback





Total ratings: 117
Rate this member
Report this Post04-03-2003 05:28 PM Click Here to See the Profile for wattsSend a Private Message to wattsDirect Link to This Post
Pressure plate to flywheel isn't super critical - about 10-15 ft lbs is good (tiny lil' bolts!). Even is more important. Go around in a criss cross pattern, couple turns on each. You don't want to warp the cover.

As for the bellhousing bolts... A good yank will do.
(ok, about 30-40lbs if you wanna be picky)

IP: Logged
avengador1
Member
Posts: 35468
From: Orlando, Florida
Registered: Oct 2001

Feedback score:    (7)
Leave feedback





Total ratings: 571
Rate this member
Report this Post04-03-2003 09:32 PM Click Here to See the Profile for avengador1Send a Private Message to avengador1Direct Link to This Post
From the Pontiac service manual for my 87 2.8 V6: Flywheel 45-55 LB. FT. Clutch cover to flywheel 13-18 LB. FT.
IP: Logged



All times are ET (US)

T H I S   I S   A N   A R C H I V E D   T O P I C
  

Contact Us | Back To Main Page

Advertizing on PFF | Fiero Parts Vendors
PFF Merchandise | Fiero Gallery
Real-Time Chat | Fiero Related Auctions on eBay



 Copyright (c) 1999, C. Pennock