Ok, you know how whenever you take something apart you lose stuff. It happened to me and now I'm missing two bolts out of the water pump. The bolts I need sizes for are the ones that are located on the bottom right corner (the two to the right of the really small bolts on bottom).

I have no clue how long they are or what thread size. Ideas?

Thanks,
Kevin

------------------

they are probably 10MM, im not sure what length they are though, some where about 1 inch long and some where about 2 inches long, depends on if they go clear through into the block or not.

the waterpump on a 87-88 model fiero uses 10mm 13mm and 15mm bolts, the 85SE engine i had, used some hex bolts some 8mm bolts 10mm bolts 13mm bots and 15mm bolts, so it may have been a whatever you can find type thing.

matthew