Quick Question. Speaker terminals use to be marked + & - . On an A & B connector, which is the positive and which is the ground?

Engineers just love to change things.

------------------
1985 Trans Am
1986 Fiero SE 2.8
1960 Pontiac Catalina

fiero and the rest of gm are mostly the same
driver front grey - tan+
pass front dark green-light green+
driver rear brown+ yellow-
pass rear dark blue+ light blue -

For the fiero:

Dark color is +
lighter color is -

[This message has been edited by RossT (edited 12-19-2002).]

timmer is right.

Almost all GM cars are the same

Light colors are positive in the front.
Dark colors are positive in the rear.

If you don't believe me, check my sig.

MOBILE

------------------
Member MN Fieros Forever 1986 GT. Self Installed SC3800/getrag almost everything performance wise is modified/upgraded, inside and out. Over 10 years in Car Audio and Car Electronics Experiance P.S. GOT 19"s??(all the way around)

Okay guys, I did it right. Thanks for the help. I got confused when I looked at the speaker clips " white nylon" and saw the word "RED" stamped on the rear clips but the red wire was not on the side that said red. I figure it must be a clip used for other purposes.
Thanks again

------------------
1985 Trans Am
1986 Fiero SE 2.8
1960 Pontiac Catalina