Pennock's Fiero Forum
  Technical Discussion & Questions - Archive
  need a little help...

T H I S   I S   A N   A R C H I V E D   T O P I C
  

Email This Page to Someone! | Printable Version


need a little help... by headhunter
Started on: 11-24-2002 10:21 PM
Replies: 5
Last post by: headhunter on 11-25-2002 04:03 PM
headhunter
Member
Posts: 400
From: waterloo, on, ca
Registered: Sep 2002


Feedback score: N/A
Leave feedback

Rate this member

Report this Post11-24-2002 10:21 PM Click Here to See the Profile for headhunterSend a Private Message to headhunterDirect Link to This Post
Just having some problems with my fiero the last day. Ok here goes. When I plug in the fuse for auxelry(can't spell the damn word) the lights in the car work, horn, and radio doesnt reset. The down side is this is killing my battery some how.
I can't see anything on, no lights etc, no sounds. Any ideas?

Ok the second is the crank fuse(3A). Whats that do?? I keep blowing it. I've hooked up a light(grounded light) and there is power going through both sides(thought this was wierd but haven't been able to find the fuse in schmatics).


Any help with these would be appreciated.

Ivan.

IP: Logged
PFF
System Bot
GTDude
Member
Posts: 9056
From: Keysville, Virginia, USA
Registered: Nov 2001


Feedback score: N/A
Leave feedback





Total ratings: 287
Rate this member

Report this Post11-24-2002 10:26 PM Click Here to See the Profile for GTDudeDirect Link to This Post
I'll be more than happy to help you once I know the year and engine you have so I can look up the schematics for the fuses. Let me know.

Phil

------------------
GTDude
OVER 25 years GM experience

IP: Logged
headhunter
Member
Posts: 400
From: waterloo, on, ca
Registered: Sep 2002


Feedback score: N/A
Leave feedback

Rate this member

Report this Post11-25-2002 12:32 AM Click Here to See the Profile for headhunterDirect Link to This Post
Well the car is an 84 and the motor was swapped with an 86 2.8. There were 5 wires that needed to be either moved on the c500 or spliced in. Hope this can give ya an idea.
IP: Logged
headhunter
Member
Posts: 400
From: waterloo, on, ca
Registered: Sep 2002


Feedback score: N/A
Leave feedback

Rate this member

Report this Post11-25-2002 12:38 AM Click Here to See the Profile for headhunterDirect Link to This Post

headhunter

400 posts
Member since Sep 2002
I had posted this in the general by accident, and a guy was saying that the crank fuse controlled the power when starting the motor. If this is so, would having the wire ground somewhere be the culprit?
IP: Logged
yellowfieroarri
Member
Posts: 619
From: Sorø, Denmark
Registered: Mar 2002


Feedback score: N/A
Leave feedback

Rate this member

Report this Post11-25-2002 01:55 AM Click Here to See the Profile for yellowfieroarriSend a Private Message to yellowfieroarriDirect Link to This Post
Here's the wiring diagrams, http://www.euronet.nl/users/fo_elmo/wiring.htm

Good luck!

------------------

IP: Logged
headhunter
Member
Posts: 400
From: waterloo, on, ca
Registered: Sep 2002


Feedback score: N/A
Leave feedback

Rate this member

Report this Post11-25-2002 04:03 PM Click Here to See the Profile for headhunterSend a Private Message to headhunterDirect Link to This Post
Have looked at all of these but haven't found the one that has the crank fuse. Anyone know what the heck it is?
IP: Logged



All times are ET (US)

T H I S   I S   A N   A R C H I V E D   T O P I C
  

Contact Us | Back To Main Page

Advertizing on PFF | Fiero Parts Vendors
PFF Merchandise | Fiero Gallery
Real-Time Chat | Fiero Related Auctions on eBay



Copyright (c) 1999, C. Pennock