Header kind say it all. Someone on the Forum was making them for a while. Anybody remember?

------------------
Roy :D
Just another stock Blue 87 GT
Suncoast Fieros

YELLOW 1988 GT w/ T-Tops, 5-Speed, and Performance Sound.GONE!

West Coast Fiero and Darrel Morse make them.
Not sure who else does.

quote Originally posted by Oreif: ...Darrel Morse make them. Not sure who else does.

Is this the same guy who does the bored throttle bodies? How do I contact him?

Thanks,
Roy

quote Originally posted by mrfixit58: Is this the same guy who does the bored throttle bodies? How do I contact him? Thanks, Roy

Yes he does the TB's and he has other items too.

Darrell Morse
21411 Concord St Nw
Elk River, MN 55330
U.S.A.
763-441-5679

eMail: morse86@aol.com

He's listed in the vendors section and he's a PFF member. For questions or items, I just Email him.

[This message has been edited by Oreif (edited 09-20-2002).]

Thanks Oreif

If you have a welder, you can just weld in a pair of washers on each side with the original metal bushing in the center for the front and two pieces of metal place cut the right size for the back. I did this and it worked very well. My total cost was a little over $3.00

Martin D. White
http://www.mindspring.com/~martinwhite/fiero

------------------
Martin D. White
86.5 GT 3.4 pushrod on 88 cradle (2.5" coilovers), gt-40 style hood vent, recessed lights, GA brakes on held drop spindles